Adler 745-34 Speedpocket Operations Instructions download pdf (Page 22)

2.6 Winding the hook thread

The external winder makes it possible to wind the hook threads

independent of the sewing operation.

–

Remove remaining thread from the bobbin hubs before winding.

–

Put the thread reel on the thread reel holder.

–

Thread the thread through the drill-hole 1 of the unwinding arm

(see picture on the left).

–

Guide the thread through guide 4.

–

Guide the thread through the bobbin thread tension 2.

–

Prewind the thread to the right in the front and back reserve

grooves of the bobbin hub.

The full reserve grooves guarantee a secure winding, even with

monofilament threads.

With the thread reserves in the reserve grooves the pocket opening

can safely be finished after the remaining thread monitor has

indicated that the bobbin is empty.

The reflecting surface 5 of the bobbin hub is to be kept clean.

–

Press the bobbin retainer 3 against the bobbin hub.

The winder starts.

After reaching the set bobbin filling level the winder shuts off

automatically.

See Service Instructions for setting the bobbin filling level.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 93 94

No comments

Adler 745-34 Speedpocket Operations Instructions Page 22