Adler 767 Instruction Manual download pdf (Page 8)

Instruction Manual

- 8 -

F-290

End SIR

F-272

Pos 0

F-161

F-280

F-500

Code 3112

F-200

Yes

KL2547

F-170

3 Putting into Service

Before putting the control into service, the following must be ensured, checked and/or adjusted:

 The correct installation of the drive, position transmitter and accompanying devices, if necessary

 If necessary, the correct adjustment of the direction of motor rotation using parameter 161

 The correct positioning speed using parameter 110

 The correct maximum speed compatible with the sewing machine using parameter 111

 Configuration of the positions

 The setting of the remaining relevant parameters

 Begin sewing in order to save the set values

4 Setting and Putting into Service with the Aid of the Fast Installation

Routine (SIR)

The Fast Installation Routine (SIR) passes through all parameters

necessary for programming the functional sequence and the positions.

Input parameter 500 (call-up SIR) 

Display of the select resistor

Enter machine model for the select resistor detected

Parameter for direction of motor rotation

Parameter for transmission ratio

(Important! The transmission ratio should be determined and

indicated as precisely as possible.)

Setting the reference position

The values can be varied by pressing key +/-. When the parameter is

displayed on the V810 control panel, press the E key once more for the

value to be displayed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

No comments

Adler 767 Instruction Manual Page 8