Adler 745-23 Operations Instructions download pdf (Page 32)

11.5 Continuity Check

Program P60 checks to see if the 24V current supply supplies current

when the output drivers are shut off.

Then the program checks all existing output elements (including

output drivers and installation) for continuity.

–

Set the "

Program

" switch to "

–

Press the "

STOP

" key.

The program is activated.

Display Explanation

Short in the installation or

one of the output drivers defective

All circuit have continuity

S17

Interruption in the output element s17, in its

(Example) installation or driver

Output element s17 does not exist because it is

optional equipment

Continue the test with the next element

by pressing the "Σ" key.

11.6 Checking the Front Panel Elements

Program P61 checks the front panel elements.

–

Set the "

Program

" switch to "

–

Press the "

STOP

" key.

The program is activated.

–

Operate the preselector switch on the front panel.

The display will show the current set value of the preselector

switch operated.

When a key on the front panel is operated (Exception: STOP key)

the numbers relating to this switch (1, 2, 4 or 8) are displayed.

–

The LEDs on the front panel are selected using code numbers. The

short designation from the circuit diagram (1 - 8) acts as their code

number.

The LEDs are switched on with the "Σ" key.

Switch Function Designation

b417

Function switch

b401

Revolutions

b402

Operation mode of the

left transport clamp

b413/412

Program switch PROGRAM

b416

Stop (Key 13) STOP

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 40 41

Comments to this Manuals

No comments

Adler 745-23 Operations Instructions Page 32

Comments to this Manuals

Related products and manuals for Sewing machines Adler 745-23