Adler 745-23 Operations Instructions download pdf (Page 9)

3.2 Sewing of a Seam Series

With the aid of the "

" key a stored series of up to four seams can be

called up.

745-22;-23

:The series can be made up of any desired order of the

three sewing lengths

and

745-24

: The series can be made up of any desired order of the

sewing lengths

and the light barrier seams

LX1

LX2

and

LX3

Calling up the Series

–

Call up the series by pressing the key "

The series is shown in the lower display line.

The current sewing length has a special marking:

745-22;-23:

The current sewing length is underlined (e.g.

L2"

745-24:

The current sewing length is preceded by an arrow

(e.g.

"->L1"

The current sewing length with the appropriate value in millimeters

is shown in the right half of the upper display line (see display

example 2).

–

A star "

" behind a sewing length means that stacking occurs after

this length is sewn.

Without stacking the material is transported back to the feed area

after sewing.

Then the next sewing length is automatically activated.

–

Using the "

" keys any desired sewing length in the series can be

activated.

Key "

": Cursor to the right

Key "

": Cursor to the left

–

To exit from the series press the keys

The approriate sewing length (L1, L2 or L3) is activated.

–

To exit form the series with the

745-24

press the key " ".

The light barrier seam is activated.

Programming a New Series

The values for the programmed sewing lengths must established

before entering the series mode (see "Selecting and Adjusting the

Sewing Length").

–

Press and hold the key "

–

At the same time press the key "

The previous series is erased.

–

By pressing the keys

and

up to four sewing lengths can

be entered in the desired order.

–

745-24 only:

After selecting a sewing length the following functions

can be set for this length using the appropriate keys:

Light Barrier On / Off

Positioning Point

Tape Feed On / Off

Tacking On / Off

Closing Order of the Flap Clamps

Corner and Center Knives On / Off

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Comments to this Manuals

No comments

Adler 745-23 Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Sewing machines Adler 745-23