Adler 867 Service Manual download pdf (Page 109)

Set-up instructions

Operating manual 867 Version 01.0 - 12/2012 107

7.15 Sewing text

Carry out a sewing test before starting up the machine. Adjust the

machine to the requirements of the material to be sewn.

To do this, read the corresponding sections of the  Operating

manual. Read the corresponding section of the  Service man-

ual in order to make adjustments to the machine if the sewing

results do not conform the to the requirements.

Performing a sewing test

1. Insert the needle.

2. Wind on the hook thread.

3. Insert the hook thread reel.

4. Thread in the hook thread.

5. Thread in the needle thread.

6. Adjust the thread tension to the material to be sewn.

7. Adjust the thread regulator to the material to be sewn.

8. Adjust the sewing foot pressure to the material to be sewn.

9. Adjust the sewing foot stroke to the material to be sewn.

10.Adjust the stitch length.

11. Transfer the desired quick function from the keypad to the addi-

tional switch.

12. Start the sewing test at low speed.

13. Increase the sewing speed continuously until the working

speed is reached.

Risk of injury by the needle point and moving

parts.

Switch off the sewing machine before replacing the

needle, insert the thread, insert the hook thread

reel, adjust the hook thread tension and the thread

regulator.

WARNING

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 119 120

No comments

Adler 867 Service Manual Page 109